'Vermont' 5kw wood burning & multi-fuel stove
Ecodesign 2022 ready
Multi-fuel, wood burning stove based on the Atrium, with 3 large windows, stone-effect chimney and log store.
Possible to connect to an external air inlet to minimise cold draughts & increase efficiency - designed for low energy houses.
Exceptional precision build quality.
Convection system for efficient and even heat distribution from the sides and rear
Plenty of radiant heat from the 3 large windows.
Primary and secondary heat controls with tertiary combustion channels.
Preheated air-wash system
Fully firebrick lined
Gloss black window surrounds with stainless steel handles and stone effect base and chimney.
Top and rear flue exit possible
Fuel used during test: Wood, Lignite ('brown coal') briquettes.
*Ecodesign 2022 Compliant: Meets the requirements of The European Union Commission Regulation (EU) 2015/1185 of 24 April 2015. This regulation will be adopted by the UK government if the UK leaves the European Union
|Nominal Output: kW||5|
|Output Range (kW)||2.5 - 7|
|Stove Height (1) mm||1747|
|Width (2) mm||735|
|Stove Depth (3) mm||615|
|Flue Outlet Diameter (4) mm||150 mm (6")|
|Centre of rear Flue to floor ( 5) mm||1475 (additional 90 degree flue pipe required)|
|Centre of top flue to back of stove (6) mm||308|
|Connection to External Air Supply (7)||YES, Optional duct required.|
|Air inlet Diameter (7) mm||100|
|Air inlet height (8) mm||208|
|Flue Outlet||Top and Rear|
|Distance to combustibles - rear - mm||200|
|Distance to combustibles - side - mm||800|
|Fuel type||Wood and Brown Coal / Lignite|
|Efficiency: Wood / Lignite %||81 / 81|
|Firebox (WxDxH) mm||Log length 300 mm|
|DEFRA Approval||No - can only be used in smoke control areas in combination with a DEFRA approved fuel|