Guy Wire Support Bracket, 150mm diameter
A band to attach guy wires (not supplied) when the flue sticks out of the roof more than 2 metres
A band to attach supporting guy wires (not supplied) when the flue sticks out of the roof more than 2 metres.
A steel rope is attached to each of the three points if possible and then fixed to a suitable position.
NOTE - The diameter referred to in twin wall chimneys is the internal diameter - the external diameter is 50mm wider, and is not used to describe the bracket.
For use on solid fuel and gas/oil appliances. eg: wood burning stoves, gas, coal effect fires, oil boilers, solid fuel appliances.
All parts fully welded.
TW Pro is HETAS Approved and is CE marked.
|Diameter||150mm internal / 200mm External|
|CE Certification||EN1856-1 T600 N1 D V2 L50040 G50|
|Inner Material||316L Stainless Steel - 0.40mm thick|
|Outer Material||304 Stainless Steel - 0.40mm thick|