Roof Support, 150mm diameter
The Roof Support is attached to the rafters in the roof space to give the flue essential support at the point where the flue exits the roof.
Pass the flue through the support and secure flue to the Roof Support Bracket
Attach the Roof Support to the rafters by screwing through the holes to give a secure fixing
This will give the flue a solid support at the point where the flue exits the roof
Distance to combustibles is 60mm. (e.g. wood, plaster board).
For use on solid fuel and gas/oil appliances. eg: wood burning stoves, gas, coal effect fires, oil boilers, solid fuel appliances.
TW Pro is HETAS Approved and is CE marked.
TW Pro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.
Twin wall chimney systems are referenced by their INTERAL diameter. The external diameter is 200mm.
|Diameter||150mm internal / 200mm External|
|CE Certification||EN1856-1 T600 N1 D V2 L50040 G50|
|Inner Material||316L Stainless Steel - 0.40mm thick|
|Outer Material||304 Stainless Steel - 0.40mm thick|