Roof Support, 150mm diameter, Black
The Roof Support is attached to the rafters in the roof space to give the flue essential support at the point where the flue exits the roof.
Pass the flue through the support and secure flue to the Roof Support Bracket
Attach the Roof Support to the rafters by screwing through the holes to give a secure fixing
This will give the flue a solid support at the point where the flue exits the roof
For use on solid fuel and gas/oil appliances. eg: wood burning stoves, gas, coal effect fires, oil boilers, solid fuel appliances.
All parts fully welded.
TW Pro is HETAS Approved and is CE marked.
NOTE – The 150 diameter referred to in twin wall chimneys is the internal diameter - the external diameter is 200mm and is not used to describe the part.
Diameter | 150mm |
---|---|
Colour | Black |
CE Certification | EN1856-1 T600 N1 D V2 L50040 G50 |
Inner Material | 316L Stainless Steel - 0.40mm thick |
Outer Material | 304 Stainless Steel - 0.40mm thick |