Round Finishing Plate 30-45º, 150mm (200mm)

Round Finishing Plate 30º-45º, for 150mm / 6" diameter TW Pro Twin Wall Insulated Chimney System.

N B The hole is for 200mm external diameter chimneys.

Round Finishing Plate 30-45º, 150mm (200mm) is available to buy in increments of 1

Delivery: normally within 3 working days.  Next day possible if ordered before 12 (T & C's apply).  more about delivery

For more info call 01244 913 320 or email us 

Free  flue design service  - we aim to beat any quote for similar products.

 

The Round Finishing Plate comes in two parts and is used to tidy the area around the flue as it passes through a non-combustible ceiling or wall.  The band itself is 78mm wide.

You can also use a non-combustible board such as 'masterboard' with plaster (heatproof) for a less visible join.

The finishing plate is attached to the ceiling or wall where the flue enters at an angle between 30° and 45° (to the perpendicular).

e.g. Chimney passing through a wall at 45 degrees.

Use silicone to seal and screws to secure against the surface.

NOTE - The diameter referred to in twin wall chimneys is the internal diameter - the external diameter is 50mm wider, and is not used to describe the cowl.

More Information
Diameter 150mm
Colour Stainless
CE Certification EN1856-1 T600 N1 D V2 L50040 G50
Inner Material 316L Stainless Steel - 0.40mm thick
Outer Material 304 Stainless Steel - 0.40mm thick
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account