Round Finishing Plate 30-45º, 150mm (200mm) - black
Round Finishing Plate 30º-45º, for 150mm / 6" diameter TW Pro Twin Wall Insulated Chimney System.
N B The hole is for 200mm external diameter chimneys.
The Round Finishing Plate comes in two parts and is used to tidy the area around the flue as it passes through a non-combustible ceiling or wall. The band itself is 75mm wide.
You can also use a non-combustible board such as 'masterboard' with plaster (heatproof) for a less visible join.
The finishing plate is attached to the ceiling or wall where the flue enters at an angle between 30° and 45° (to the perpendicular).
e.g. Chimney passing through a wall at 45 degrees.
Use silicone to seal and screws to secure against the surface.
NOTE - The diameter referred to in twin wall chimneys is the internal diameter - the external diameter is 50mm wider, and is not used to describe the cowl.
|CE Certification||EN1856-1 T600 N1 D V2 L50040 G50|
|Inner Material||316L Stainless Steel - 0.40mm thick|
|Outer Material||304 Stainless Steel - 0.40mm thick|