Support Brackets

View as List Grid

12 Items

per page
Set Descending Direction
  1. Guy Wire Support Bracket, 150mm diameter

    A band to attach guy wires (not supplied) when the flue sticks out of the roof more than 2 metres

    Learn More
    £9.00
  2. Adjustable Wall Support 50-80mm, 150mm diameter.
    150mm / 6" diameter TW Pro Twin Wall Insulated Chimney System. Adjustable Lateral Support bracket 50-80mm Learn More
    £15.00
  3. Floor Joist Support, 150mm diameter.

    The Floor or Ceiling Joist Support is used as a support on the upper side of a floor or ceiling.

    It is typically used in conjunction with a Fire-stop plate on the underside of the floor.

    In stainless steel.

    Learn More
    £18.00
  4. Roof Support, 150mm diameter

    The Roof Support is attached to the rafters in the roof space to give the flue essential support at the point where the flue exits the roof.

    Learn More
    £18.00
  5. Structural Locking Band for 150 Ø Twin Wall Chimney System

    Replacing the included locking band, the Structural Locking Band increases the maximum unsupported height of the chimney to 2.5m.

    The Structural Locking Band must be used on the joint of each freestanding part.

    Learn More
    £22.00
  6. Adjustable Wall Support 80-130mm, 150mm diameter.

    150mm / 6" diameter TW Pro Twin Wall Insulated Chimney System. Adjustable Lateral Support bracket 80mm-130mm

    NOTE - The diameter referred to in twin wall chimneys is the internal diameter - the external diameter is 50mm wider, and is not used to describe the bracket.

    Learn More
    £40.00
  7. Adjustable Wall Support 130-210mm, 150mm diameter

    150mm / 6" diameter TW Pro Convesa Twin Wall Insulated Chimney System. Adjustable Lateral Support bracket 130-210mm

    NOTE - The diameter referred to in twin wall chimneys is the internal diameter - the external diameter is 50mm wider, and is not used to describe the bracket.

    Learn More
    £43.00
  8. Guy Wire Kit

    A band to attach guy wires (not supplied) when the flue sticks out of the roof more than 2 metres

    Learn More
    £45.00
  9. Roof Brace Kit

    If the chimney extends 1.5m or more above the roof, a Roof Brace Kit is required to support the chimney.

    Learn More
    £49.00
  10. Adjustable Wall Support 210-420mm, 150mm diameter

    150mm / 6" diameter TW Pro Convesa Twin Wall Insulated Chimney System. Adjustable Lateral Support bracket 210-420mm

    NOTE - The diameter referred to in twin wall chimneys is the internal diameter - the external diameter is 50mm wider, and is not used to describe the bracket.

    Learn More
    £51.00
  11. Console Plate, 150mm diameter

    Console Plate used as the starter piece on top of a chimney where the stack has been removed, or on a prefabricated fireplace.

    Learn More
    £84.00
  12. Adjustable Base Support, 150mm

    Adjustable Base Support used at the base of a chimney stack to support the weight of the chimney, supports up to 20 metres height.

    With locking band.

    Learn More
    £114.00
View as List Grid

12 Items

per page
Set Descending Direction