All Products

View as List Grid

55 Items

per page
Set Descending Direction
  1. Chimney Notice Plate
    A Building Regulations requirement. Included in the fitting kits. Learn More
    £2.50
  2. Guy Wire Support Bracket, 150mm diameter

    A band to attach guy wires (not supplied) when the flue sticks out of the roof more than 2 metres

    Learn More
    £9.00
  3. Fixing Kit for Sheet roof flashing

    A tube of silicone, self tapping screws and seals.

    We rarely spec this because mastic is better than silicone, and you can buy similar screws in a box of 100 for a fiver from a well known screw and fixing retailer!

    Learn More
    £10.00
  4. Fortafix High Temperature Sealant
    Designed for use where high temperature rigid seal or adhesion is required, eg, on flues, stoves or other heating devices. Can be used safely as an adhesive or sealant where resistance to the spread of flame is required. To be used with a cartridge gun. Learn More
    £12.00
  5. Adjustable Wall Support 50-80mm, 150mm diameter.
    150mm / 6" diameter TW Pro Twin Wall Insulated Chimney System. Adjustable Lateral Support bracket 50-80mm Learn More
    £15.00
  6. Storm Collar for 150mm diameter Twin Wall Chimney system.

    The storm collar protects the rubberised flashing from wear due to severe weather conditions.

    For 150mm chimney with 200mm external diameter

    Learn More
    £17.00
  7. Increaser adapter: 125mm Single wall to 150mm Twin Wall Adapter - TW Pro Twin Wall Chimney System

    Increaser adapter used to connect 125mm diameter Flue Pipe / Stove Pipe / Single Wall Pipe to the 150mm diameter TW Pro Twin Wall Insulated Chimney System.

    Learn More
    £18.00
  8. Floor Joist Support, 150mm diameter.

    The Floor or Ceiling Joist Support is used as a support on the upper side of a floor or ceiling.

    It is typically used in conjunction with a Fire-stop plate on the underside of the floor.

    In stainless steel.

    Learn More
    £18.00
  9. Roof Support, 150mm diameter

    The Roof Support is attached to the rafters in the roof space to give the flue essential support at the point where the flue exits the roof.

    Learn More
    £18.00
  10. Adapter: Flue Pipe to KC Twin Wall Chimney System

    Adapter to connect 150mm diameter Flue Pipe / Stove Pipe / Single Wall Pipe to the 150mm diameter TW Pro Twin Wall Insulated Chimney System.

    Learn More
    £18.00
  11. Round Finishing Plate 30-45º, 150mm (200mm)

    Round Finishing Plate 30º-45º, for 150mm / 6" diameter TW Pro Twin Wall Insulated Chimney System.

    N B The hole is for 200mm external diameter chimneys.

    Learn More
    £21.00
  12. Round finishing Plate 0-30º, 150mm (200mm) Stainless.

    Round Finishing Plate 0-30º, for 150mm / 6" diameter TW Pro Twin Wall Insulated Chimney System.

    N B The hole is for 200mm external diameter chimneys.

    Learn More
    £21.00
  13. Structural Locking Band for 150 Ø Twin Wall Chimney System

    Replacing the included locking band, the Structural Locking Band increases the maximum unsupported height of the chimney to 2.5m.

    The Structural Locking Band must be used on the joint of each freestanding part.

    Learn More
    £22.00
  14. Finishing Plate 30º-45º, 150mm (200mm)

    Finishing Plate 30º-45º, for 150mm / 6" diameter TW Pro Twin Wall Insulated Chimney System.

    N B The hole is for 200mm external diameter chimneys.

    Learn More
    £23.00
  15. Finishing Plate 0º-30º, 150mm (200mm)

    Finishing Plate 0º-30º, for 150mm / 6" diameter TW Pro Twin Wall Insulated Chimney System.

    N B The hole is for 200mm external diameter chimneys.

    Learn More
    £23.00
  16. Fireangel CO-9X Carbon Monoxide Alarm

    A Building Regulations requirement.

    The CO-9X is an easy to use and reliable self-contained Carbon Monoxide alarm.

    No maintenance, Batteries supplied and pre-fitted.

    Learn More
    £24.99
  17. Cap for T Piece and locking band / 150mm

    150mm / 6" diameter TW Pro Twin Wall Insulated Chimney System T piece Cap and locking band.

    Learn More
    £25.00
  18. Flat Adapter: Flue Pipe to TWPro Twin Wall Chimney System

    Adapter to connect 150mm diameter Flue Pipe / Stove Pipe / Single Wall Pipe to the 150mm diameter TW Pro Twin Wall Insulated Chimney System.

    Learn More
    £25.00
  19. Flashing for Sheet / Corrugated Roofs, EPDM 152mm-280mm

    Rubberised flashing with flexible alloy base suitable for profiled sheeting and flat panel surfaces.

    For twin wall chimney systems with external pipe diameters of 150 to 300mm (6 to 12 inch)

    i.e.internal diameters 4 to 10 inch)

    Learn More
    £25.00
  20. 45º Adjustable Wall Sleeve for 150mm Twin wall chimneys (210 mm diameter sleeve)

    The Adjustable Wall Sleeve is used when the flue system passes through an outside wall.

    Cut to 45 degree angle.

    N B The sleeve is for 210mm external diameter / 150mm twin wall chimney systems

    Learn More
    £26.00
  21. Cap for T Piece with Drain hole and locking band / 150mm

    150mm / 6" diameter TW Pro Twin Wall Insulated Chimney System T piece Cap with drain hole and locking band.

    Learn More
    £27.00
  22. EPDM Flashing - for 150mm diameter Chimney system.

    Low Cost Alternative Rubberised flashing with flexible alloy base suitable for pitched tiled or slate roofs.

    For twin wall chimney systems External diameter 175 - 275mm.

    Learn More
    £30.00
  23. Twin Wall, 250mm & locking band

    Quarter Metre / 250mm / Length Straight Pipe 150mm / 6" diameter TW Pro Twin Wall Insulated Chimney System. EFFECTIVE LENGTH 200mm

    Learn More
    £33.00
  24. Vented Firestop Plate, White, 150mm

    A Ventilated Firestop plate used when the chimney passes between floors

    i.e when the chimney passes through the ceiling on the ground floor through to the first floor

    NOTE - The diameter referred to in twin wall chimneys is the internal diameter - the external diameter is 50mm wider, and is not used to describe the vented firestop plate.

    Learn More
    £34.00
  25. 100mm Direct Ventilation Kit 6x6 Louvre Grill - Terracotta

    Direct ventilation kit for stoves with air inlet connections.

    The ducting attaches to the back of the stove via the manufacturers inlet allowing combustion air direct from the outside

    Learn More
    £35.00
  26. Flat increaser adapter: 125mm Single wall to 150mm Twin Wall Adapter - TW Pro Twin Wall Chimney System
    Increaser adapter used to connect 125mm diameter Flue Pipe / Stove Pipe / Single Wall Pipe to the 150mm diameter TW Pro Twin Wall Insulated Chimney System. Learn More
    £35.00
  27. Adjustable Wall Support 80-130mm, 150mm diameter.

    150mm / 6" diameter TW Pro Twin Wall Insulated Chimney System. Adjustable Lateral Support bracket 80mm-130mm

    NOTE - The diameter referred to in twin wall chimneys is the internal diameter - the external diameter is 50mm wider, and is not used to describe the bracket.

    Learn More
    £40.00
  28. Adjustable Wall Support 130-210mm, 150mm diameter

    150mm / 6" diameter TW Pro Convesa Twin Wall Insulated Chimney System. Adjustable Lateral Support bracket 130-210mm

    NOTE - The diameter referred to in twin wall chimneys is the internal diameter - the external diameter is 50mm wider, and is not used to describe the bracket.

    Learn More
    £43.00
  29. Guy Wire Kit

    A band to attach guy wires (not supplied) when the flue sticks out of the roof more than 2 metres

    Learn More
    £45.00
  30. Rain Cap / 150mm & locking band.

    Rain Cap for 150mm / 6" diameter TW Pro Twin Wall Insulated Chimney System.

    Learn More
    £45.00
  31. Flexible Flue Liner to Twin Wall Adapter / 150mm

    An adapter for connecting a 150mm TW Pro Twin Wall Insulated Chimney onto a 155mm Flexible Flue Liner.

    The Flue liner will be at the bottom and the twin wall chimney fitted above

    Learn More
    £48.00
  32. Roof Brace Kit

    If the chimney extends 1.5m or more above the roof, a Roof Brace Kit is required to support the chimney.

    Learn More
    £49.00
  33. Twin Wall to Flexible Flue Liner Adapter for 150mm TW Pro flue

    An adapter for connecting a 155mm Flexible Flue Liner onto the top of a 150mm TW Pro Twin Wall Insulated Chimney.

    The Flue liner will be above the twin wall chimney.

    Learn More
    £50.00
  34. Adjustable Wall Support 210-420mm, 150mm diameter

    150mm / 6" diameter TW Pro Convesa Twin Wall Insulated Chimney System. Adjustable Lateral Support bracket 210-420mm

    NOTE - The diameter referred to in twin wall chimneys is the internal diameter - the external diameter is 50mm wider, and is not used to describe the bracket.

    Learn More
    £51.00
  35. 15º Bend & locking band / 150mm

    15º Bend, 150 / 6" diameter TW Pro Twin Wall Insulated Chimney System.

    Learn More
    £51.00
  36. 30º Bend / 150mm & locking band.

    30º Bend, 150 / 6" diameter TW Pro Twin Wall Insulated Chimney System.

    Learn More
    £51.00
  37. 45º Bend / 150mm & locking band.

    45º Bend, 150 / 6" diameter TW Pro Twin Wall Insulated Chimney System.

    Learn More
    £51.00
  38. Wind Cowl - Rain Cap / 150mm & locking band.

    Wind Cowl / Rain Cap 150 / 6" diameter TW Pro Twin Wall Insulated Chimney System.

    Learn More
    £53.00
  39. Twin Wall, 500mm & locking band

    Half Metre / 500mm / Length Straight Pipe 150mm / 6" diameter TW Pro Twin Wall Insulated Chimney System. Effective Length 450mm

    Learn More
    £55.00
  40. Adjustable Twin Wall 250mm - 350mm & locking band.

    250mm - 350mm Adjustable Length Straight Pipe 150mm / 6" diameter TW Pro Twin Wall Insulated Chimney System.

    Learn More
    £57.00
  41. Twin Wall Chimney, 1 metre & locking band
    Rating:
    87% of 100

    One Metre Length Straight Pipe 150mm / 6" diameter TW Pro Twin Wall Insulated Chimney System. EFFECTIVE LENGTH 950mm

    Learn More
    £68.00
  42. Adjustable Twin Wall 350mm - 500mm & locking band.

    350mm - 500mm Adjustable Length Straight Pipe 150mm / 6" diameter TW Pro Twin Wall Insulated Chimney System.

    Learn More
    £69.00
  43. 90º Bend / 150mm & locking band.

    90º Bend, 150mm / 6" diameter TW Pro Twin Wall Insulated Chimney System.

    Learn More
    £80.00
  44. Console Plate, 150mm diameter

    Console Plate used as the starter piece on top of a chimney where the stack has been removed, or on a prefabricated fireplace.

    Learn More
    £84.00
  45. Twin Wall Chimney, Starter Length - 1 metre

    One Metre STARTER Length with integral adapter.

    Straight Pipe 150mm / 6" diameter TW Pro Twin Wall Insulated Chimney System.

    EFFECTIVE LENGTH 962mm

    Learn More
    £95.00
  46. Adjustable Twin Wall 500mm - 880mm & locking band.

    500mm - 880mm Adjustable Length Straight Pipe 150mm / 6" diameter TW Pro Twin Wall Insulated Chimney System.

    Learn More
    £96.00
  47. Adjustable Connecting Twin Wall Chimney - 500mm length

    The ideal solution for connecting the stove directly to a twin wall chimney, leaving no part of the single wall flue pipe visible when used in conjunction with our EU to UK converter pipe.

    Straight Pipe 150mm / 6" diameter TW Pro Twin Wall Insulated Chimney System.

    Learn More
    £103.00
  48. 90º T Piece with locking band / 150mm .

    150mm / 6" diameter TW Pro Twin Wall Insulated Chimney System, 90 Degree T Piece and locking band.

    Learn More
    £105.00
  49. Adjustable Base Support, 150mm

    Adjustable Base Support used at the base of a chimney stack to support the weight of the chimney, supports up to 20 metres height.

    With locking band.

    Learn More
    £114.00
  50. Adjustable Connecting Twin Wall Chimney - 1 metre

    The ideal solution for connecting the stove directly to a twin wall chimney, leaving no part of the single wall flue pipe visible when used in conjunction with our EU to UK converter pipe.

    Straight Pipe 150mm / 6" diameter TW Pro Twin Wall Insulated Chimney System.

    Learn More
    £120.00
  51. 45º (135º) T Piece with locking band / 150mm

    A 45º T Piece is also referred to as a 135º Tee.

    It is required at the bottom of a run of vertical chimney to allow access through the bottom for cleaning, emptying fallen soot, and draining of water.

    Learn More
    £133.00
  52. Flue Damper (255mm) & locking band.

    150mm / 6" diameter TW Pro Twin Wall Insulated Chimney System flue damper. Used to reduce up-draught within the chimney.

    Learn More
    £135.00
  53. Rotating Anti Downdraught Cowl / 150mm

    Anti Downdraught Cowl 150 / 6" diameter TW Pro Twin Wall Insulated Chimney System.

    Learn More
    £155.00
    Call 01244 913 320 for Availability
  54. Windkat Twin Wall Flue Cowl / 150mm

    Windkat Twin Wall Flue Cowl  150mm / 6" internal twin wall diameter

    10 year manufacturers warranty

    Learn More
    £182.00
  55. 45º (135º) LONG T Piece with locking band / 150mm

    A 45º T Piece is also referred to as a 135º  Long Tee.

    It is required at the bottom of a run of vertical chimney to allow access through the bottom for cleaning, emptying fallen soot, and draining of water.

    Learn More
    £236.00
View as List Grid

55 Items

per page
Set Descending Direction