Guy Wire Kit

A band to attach guy wires (not supplied) when the flue sticks out of the roof more than 2 metres

In stock
£45.00
Guy Wire Kit is available to buy in increments of 1

Delivery: normally within 3 working days.  Next day possible if ordered before 12 (T & C's apply).  more about delivery

For more info call 01244 913 320 or email us 

Free  flue design service  - we aim to beat any quote for similar products.

 

The Stove-Care Guy Wire Kit is used in conjunction with the guy wire bracket to support a high or unsteady twin wall stainless steel chimney.

All parts are made from galvanised steel.

The kit consistes of enough parts to make THREE 10m long supporting wires.

INSTALLATION:

1. Secure the GUY WIRE BRACKET (separate purchase) to your chimney.

2. Pass the Wire Rope through the Grip to create a loop.

3. Insert the Thimble inside the loop and tighten the Wire Rope Grip using the nuts until the Thimble is secure.

4. Unscrew the D-Shackle and pass through the loop.

5. Attach the tensioner (barrel strainer) via the EYE by passing through the threaded bar component of the D-Shackle.

6. Secure the Hook and Eye Strainers to either bolts or screws that have been secured into masonry.

 

PACK CONTENTS:

30 metres of 3 mm diameter glavanised steel wire rope.

6 x D-Shackles.

6 x Thimbles

12 x Wire Rope Grips.

3 x Hook and Eye Barrel Strainers.

More Information
Diameter 150mm
Colour Stainless
Inner Material 316L Stainless Steel - 0.40mm thick
Outer Material 304 Stainless Steel - 0.40mm thick
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account