Finishing Plate 0-30º, 150mm (200mm) Black
Finishing Plate 0-30º, for 150mm / 6" diameter TW Pro Twin Wall Insulated Chimney System.
N B The hole is for 200mm external diameter chimneys.
The Finishing Plate comes in two parts and is used to tidy the area around the flue as it passes through a non-combustible ceiling or wall.
You can also use a non-combustible board such as 'masterboard' with plaster (heatproof) for a less visible join.
The finishing plate is attached to the ceiling or wall where the flue is passing through with an angle entering the wall between 0° and 30° (to the perpendicular).
For example a shallow pitched ceiling.
Use silicone to seal and screws to secure against the surface.
NOTE – The 150 diameter referred to in twin wall chimneys is the internal diameter - THE HOLE IN THIS PLATE IS 200mm and is not used to describe the part.
|Diameter||150mm internal / 200mm External|
|CE Certification||EN1856-1 T600 N1 D V2 L50040 G50|
|Inner Material||316L Stainless Steel - 0.40mm thick|
|Outer Material||304 Stainless Steel - 0.40mm thick|