Twin Wall Chimney, Connecting Starter Length - 1 metre
1000mm pipe with a rebated slip joint at the bottom that allows a connecting pipe to slide inside the main pipe allowing adjustment of up to 200mm. This allows pre installation of the chimney system and allows for safe disconnection of the appliance without disturbing the TWPro
Straight Pipe 150mm / 6" diameter TW Pro Twin Wall Insulated Chimney System.
**TW-Pro is not compatible with any other brand of twinwall chimney system**
150mm / 6" diameter KC Twin Wall Insulated Chimney System 1 metre length pipe.
For use on solid fuel and gas/oil appliances. eg: wood burning stoves, gas, coal effect fires, oil boilers, solid fuel appliances. Insulation: compressed rockwool, all parts fully welded. Distance to combustibles is 60mm. (e.g. wood, plaster board). TW Pro is HETAS Approved and is CE marked. When fitting you should seal the joint with fire cement or better still 'Fortafix Flueseal' or 'Envirograf'. TW Pro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.
Diameter | 150mm |
---|---|
Colour | Stainless |
Inner Material | 316L Stainless Steel - 0.40mm thick |
Outer Material | 304 Stainless Steel - 0.40mm thick |