'Tulsa' 5kw wood burning / multi-fuel stove, Soapstone
Output controllable from 2.5 - 7 kW, controls for the secondary and primary air.
Optional external air inlet to minimise cold draughts & increase efficiency - designed low energy use houses in mind.
Matt black with flush fitting stainless steel handle
Convection system for efficient and even heat distribution from the sides and rear
Plenty of radiant heat from the large window.
Primary and secondary heat controls with tertiary combustion channels.
Preheated air-wash system directed at the glass from top and sides.
Fully firebrick lined
Top and rear flue exit
Includes a cast iron hob on top for heating a kettle or similar
*Ecodesign 2022 Compliant: Meets the requirements of The European Union Commission Regulation (EU) 2015/1185 of 24 April 2015. This regulation will be adopted by the UK government if the UK leaves the European Union
|Colour||Black / Soapstone|
|Nominal Output: kW||5|
|Output Range (kW)||2.5 - 7|
|Stove Height (1) mm||925|
|Width (2) mm||516|
|Stove Depth (3) mm||380|
|Flue Outlet Diameter (4) mm||150 mm (6")|
|Centre of rear Flue to floor ( 5) mm||786|
|Centre of top flue to back of stove (6) mm||134|
|Connection to External Air Supply (7)||YES, Optional duct required.|
|Air inlet Diameter (7) mm||100|
|Air inlet height (8) mm||258|
|Flue Outlet||Top and Rear|
|Distance to combustibles - rear - mm||200|
|Distance to combustibles - side - mm||200|
|Fuel type||Wood and Brown Coal / Lignite|
|Efficiency: Wood / Lignite %||81 / 81|
|Firebox (WxDxH) mm||Log length 280 mm|
|DEFRA Approval||No - can only be used in smoke control areas in combination with a DEFRA approved fuel|