Register Plate (H) - No Holes 900mm x 600mm

900mm x 600mm

No Holes - useful when you use vermiculite for insulation, or have an odd shape chimney.

In stock
SKU
94-REG-H
£30.00
Register Plate (H) - No Holes 900mm x 600mm is available to buy in increments of 1

Delivery: normally within 3 working days.  Next day possible if ordered before 12 (T & C's apply).  more about delivery

For more info call 01244 913 320 or email us 

Free  flue design service  - we aim to beat any quote for similar products.

 

Register Plates, also known as Debris Plates or Closure plates, are used to seal off the base of the chimney.
This Register Plate is 900mm x 600mm
It has NO access holes so it is suitable for insulation.
It is suitable for ANY size Grey / Black Stove Pipe.

APPLICATION
Use to seal off the base of the chimney (The Register Plate is cut on site to fit the size of the chimney stack at the top of the fireplace). The Register Plate will support vermiculite and stop any debris from within the chimney stack coming down the chimney and hitting your stove.

CONSTRUCTION
The Register Plate and the Supporting Brackets are made from 1.5mm thick galvanised steel. The Register Plate can be sprayed to match the colour of your stove pipe.

INSTALLATION
The four supporting brackets should be cut to the length and width of the base of your chimney stack. Drill a number of holes in the brackets. Now screw them into the brickwork. Cut the Register Plate to the correct size, taking care that the pipe hole lies vertically above the Black Stove Pipe. Drop the Register Plate onto the supporting brackets. Now seal any gaps between the brickwork and the brackets / plate using Fire Cement or High Temperature Sealant. For 150mm diameter installations simply remove the centre cover ring by unscrewing the two retaining screws.

MAINTENANCE
It is recommended that chimneys serving solid fuel appliances be swept and maintained as frequently as necessary but at least once a year.


DO NOT REMOVE COVER PLATES IF VERMICULITE HAS BEEN INSTALLED AS ADDED INSULATION.

More Information
Flue Pipe Diameter Adaptable to 125 and 150 mm
Galvanised steel Galvanised Steel
Thckness 1.5 mm
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account