Register Plate (G) - 125/150mm Hole
900mm x 495mm
With 2 Access Holes for Cleaning Chimney Debris
Register Plates, also known as Debris Plates or Closure plates, are used to seal off the base of the chimney.
This Register Plate is 900mm x 495mm
It has two access holes for ease of sweeping/removing any debris that has fallen.
It is suitable for 125mm and 150mm (5 and 6 inch) Grey / Black Stove Pipe.
Use to seal off the base of the chimney (The Register Plate is cut on site to fit the size of the chimney stack at the top of the fireplace). The Register Plate will support vermiculite and stop any debris from within the chimney stack coming down the chimney and hitting your stove.
The Register Plate and the Supporting Brackets are made from 1.5mm thick galvanised steel. The Register Plate can be sprayed to match the colour of your stove pipe. This Register Plate has a removable adapter for either 125mm or 150mm / 5 inch or 6 inch diameter flue pipes.
The four supporting brackets should be cut to the length and width of the base of your chimney stack. Drill a number of holes in the brackets. Now screw them into the brickwork. Cut the Register Plate to the correct size, taking care that the pipe hole lies vertically above the Black Stove Pipe. Drop the Register Plate onto the supporting brackets. Now seal any gaps between the brickwork and the brackets / plate using Fire Cement or High Temperature Sealant. For 150mm diameter installations simply remove the centre cover ring by unscrewing the two retaining screws.
It is recommended that chimneys serving solid fuel appliances be swept and maintained as frequently as necessary but at least once a year. At the same time remove the Register Plates inspection hole cover plate(s) and hoover / sweep any debris that has fallen.
DO NOT REMOVE COVER PLATES IF VERMICULITE HAS BEEN INSTALLED AS ADDED INSULATION.
|Flue Pipe Diameter||Adaptable to 125 and 150 mm|
|Galvanised steel||Galvanised Steel|