'Wells' Corner Fireplace Set with 7kW Inset Wood Burning Stove - Black Granite
A complete kit for creating an inset stove installation without the need for a masonry chimney breast to house it.
- the wood burner
- a plaster coated metal structure that creates a false wall or corner
- a black granite stove surround
Ecodesign 2022 ready
- Nominal output 7kW
- Controllable output range: 3.5 - 9kW
- Log length: 280mm / 18"
- flue: 150mm, see diagram
- efficiency: wood 81%, coal 80%
- heated room volume 70-180 m3
- weight 247 kg
This fireplace set is designed for a flue that exits the top of the stove and then either continues vertically or can enter the chimney breast at 90 degrees.
In the second case, consideration must be given to the means by which the masonry chimney will be cleaned.
Please note the 1630mm height of the assembly - a separate false bulkhead will need to be created above it.
*Ecodesign 2022 Compliant: Meets the requirements of The European Union Commission Regulation (EU) 2015/1185 of 24 April 2015.
|Nominal Output: kW||7|
|Output Range (kW)||3.5 - 9|
|Stove Height (1) mm||1630 mm (1)|
|Width (2) mm||854 mm (2)|
|Stove Depth (3) mm||854 mm (3)|
|Flue Outlet Diameter (4) mm||150 mm (6")|
|Centre of rear Flue to floor ( 5) mm||1262|
|Centre of top flue to back of stove (6) mm||444|
|Connection to External Air Supply (7)||YES, Optional duct required.|
|Air inlet Diameter (7) mm||100 mm|
|Air inlet height (8) mm||N/A|
|Flue Outlet||Top and Rear|
|Distance to combustibles - rear - mm||tbc|
|Distance to combustibles - side - mm||tbc|
|Fuel type||Wood and Brown Coal / Lignite|
|Efficiency: Wood / Lignite %||81 / 82.5|
|Firebox (WxDxH) mm||Log length 280 mm|
|DEFRA Approval||No - can only be used in smoke control areas in combination with a DEFRA approved fuel|