Nose Cone - 6" multi fuel liner
The nose cone is attached to the bottom end of the liner, it prevents the liner snagging against the side of the chimney during installation. Please note that the rope is not included.
Insert a length of rope (not supplied) into the hole of the nose cone. Secure with a knot. make sure the rope is long enough to reach to the bottom of the chimney stack.
Tape the nose cone to the flue liner end. Secure a hanger or insert to the top end of the liner.
Tie a weight to the bottom of the rope, and send down the chimney.
Pull gently on the rope at the same time as someone pushes the liner down the chimney from above.