Console Plate, 150mm diameter
Console Plate used as the starter piece on top of a chimney where the stack has been removed, or on a prefabricated fireplace.
**TW-Pro is not compatible with any other brand of twinwall chimney system**
The Console Plate can be used in 2 ways.
1. As the starter piece on the top of a chimney that has been removed, just under the roof surface; the stainless chimney system replacing the old stack and chimney pot.
2. As a mounting plate (starter peice) on a prefabricated fire chest (usually made from pumice.)
Distance to combustibles is 60mm. (e.g. wood, plaster board).
For use on solid fuel and gas/oil appliances. eg: wood burning stoves, gas, coal effect fires, oil boilers, solid fuel appliances.
Insulation: compressed rockwool, all parts fully welded.
TW Pro is HETAS Approved and is CE marked.
TW Pro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.
Twin wall chimney systems are referenced by their INTERAL diameter. The external diameter is 200mm.
Diameter | 150mm internal / 200mm External |
---|---|
Colour | Stainless |
CE Certification | EN1856-1 T600 N1 D V2 L50040 G50 |
Inner Material | 316L Stainless Steel - 0.40mm thick |
Outer Material | 304 Stainless Steel - 0.40mm thick |