-50%

90 Degree Angle with Cleaning Access / Matt Black

90 Degree angle welded from 3 parts for smoother airflow.

European type heavy gauge steel pipe with matt grey painted finish.

< Robust construction of 2mm thick Steel, Type EN 10025

In stock
Now Only £15.00 Regular Price £30.00
90 Degree Angle with Cleaning Access / Matt Black is available to buy in increments of 1

Delivery: normally within 3 working days.  Next day possible if ordered before 12 (T & C's apply).  more about delivery

For more info call 01244 913 320 or email us 

Free  flue design service  - we aim to beat any quote for similar products.

 

300mm x 300mm approx

Air tight flush fitting joints (N1 / 40 Pa).

CHECK REGULATIONS WITH YOUR INSTALLER PRIOR TO PURCHASE

Flush Fitting Joints of European Flue Pipe

For solid fuel appliances tested to temperatures up to 500 degrees C.

Used to connect the stove and Flue Liner / Chimney Stack / Twin Wall Flue System.
CANNOT be used to pass through ceilings or walls, or outdoors.

INSTALLATION
Distance to combustible materials (including fire rated plaster board): 500 mm minimum (or UK regs state > 3 times the diameter of the flue,

150mm diameter Flue Pipe should be 450mm away from combustible materials.
The smaller spigot end should be pointing downward to allow water to flow within the pipe.
Joints can be sealed with a fine jointing compound if desired (flueseal or ceramix - fire cement is too coarse). Joins between the flue pipe and stove,  and between the flue pipe and twin wall chimney or flue liner,  will need to be sealed and may require a fire proof glass rope also.

MAINTENANCE
Inspect the chimney at least every 6 months and clean every 12 months, more often when using coal.

Use a pipe with an access door, or clean from within the stove when possible.

More Information
Colour Black
CE Rating EN 1856-2-T400-N1-D-VmL01200-G500
Diameter 150mm
Wall Thickness 2 mm
Type (EU / UK) European
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account