500mm EU to UK Converter Flue Pipe / Matt Black / Without Door

Free with every stove where the stove's flue exit is the European type, automatically added to the order.
(Cleaning door pipe supplied if there is no access from within the stove for cleaning).
Converts EU type stoves to conform to UK regulations. 
Can be cut to length.
Internal diameter 150mm.
500mm EU to UK Converter Flue Pipe / Matt Black / Without Door is available to buy in increments of 1

Delivery: normally within 3 working days.  Next day possible if ordered before 12 (T & C's apply).  more about delivery

For more info call 01244 913 320 or email us 

Free  flue design service  - we aim to beat any quote for similar products.


EU regulations require the pipe fitting around the outside of the flue exit / spigot to allow the smooth flow of the flue gasses. UK regs have it on the inside to let water run into the stove.

This pipe has a flange on the inside of the pipe which acts as a drip bead which causes water to fall inside the stove's flue exit. Each subsequent pipe fits inside the pipe below.

Can be cut and used as an adapter for vitreous enamel pipes*, or as the starter length for further matching black flue pipes.

*pipes must fit inside the internal diameter of 150mm


European type heavy gauge steel pipe with matt black painted finish.

440 mm Effective length, can be cut to length.

Robust construction of 2mm thick Steel, Type EN 10025

Air tight flush fitting joints (N1 / 40 Pa).

Flush Fitting Joints of European Flue Pipe

For solid fuel appliances,  tested to temperatures up to 500 degrees C.

Used to connect the stove and Flue Liner / Chimney Stack / Twin Wall Flue System.
CANNOT be used to pass through ceilings or walls, or outdoors.

Distance to combustible materials: 3 times the diameter of the flue, (wood, plaster board, etc.)

150mm diameter Flue Pipe should be 450mm away from combustible materials.
The smaller spigot end should be pointing downward to allow water to flow within the pipe. (UK building regs)
Joints can be sealed with a fine jointing compound (flueseal, ceramix). Joins between the flue pipe and stove and between the flue pipe and twin wall chimney or flue liner may require a fire proof glass rope also.

Inspect the chimney every 6 months minimum and clean every 12 months, possibly more often when using coal.

Use a pipe with an access door or clean from within the stove.

More Information
Colour Black
CE Rating EN 1856-2-T400-N1-D-VmL01200-G500
Diameter 150mm
Length 500 mm
Wall Thickness 2 mm
Type (EU / UK) European
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account