For sales or technical enquiries, call 01244 913 320 or email info@greymetal.co.uk

Stainless Steel Flue Liner 904L - 40 METRE DRUM - 150mm / 6"

Be the first to review this product

20 year warranty (conditions apply).

A double skinned 904L Grade flexible flue liner suitable for relining within a masonry chimney. Flue liner is suitable for use with gas, oil, coal, coke, cured dry logs, cured dry peat

RECOMMENDED FOR SMOKELESS FUEL over the 316L liner.

Availability: In stock

£1,120.00

 

Delivery: normally within 3 working days.  Next day possible if ordered before 12 (T & C's apply). more about delivery .
* Autumn 2017: we are very busy and some deliveries are taking up to 5 working days *

For more info call 01244 913 320 or email us 

We aim to give you the best prices on all stoves, and include a free flue pipe. If you've seen it cheaper, call or email us the link.

Free flue design service  - we aim to beat any quote for similar products.

 

More Info

Details

The 904 flue liner is constructed from a single strip of 904L grade steel which is bent at 180 degrees and then folded in four planes to give the "quattrolock" seal. The flue liner is approved and listed by HETAS FLUE LINER INSTALLATION: Flue Liner should always be fitted from the top. Make sure the arrows are pointing upwards (gas flow). 1.Have the chimney swept and checked professionally to see if a liner is required. 2. Make sure the liner will go down the chimney e.g. by pulling down a 1 metre section of the liner you will be using. 3.Check your chimney pot is in good condition, if you are NOT using a suspended chimney pot cowl then remove the pot from the stack. 4. Secure a length of rope longer than the Flue Liner to the Nose Cone (ordered separately as part of a fitting kit). 5. Attach the Nose Cone onto the end of the Flue Liner, making sure the arrows on the Flue Liner are pointing away from the Nose Cone in an upward direction so when the liner is installed the arrows will be pointing UP to the top of the chimney. 6. Pull the liner down the chimney using the rope and at the same time have someone at the top of the chimney pushing the Flue Liner down. MAINTENANCE: Chimneys serving solid fuel appliances should be checked every 6 months and swept at least once a year.

Dimensions

Dimensions

Inner Material 904L - 0.12mm thick
Outer material 904L - 0.12mm thick
Certification EN1856-2 T450 N1 D V3 L70012 G

Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Tags

Tags

Use spaces to separate tags. Use single quotes (') for phrases.